Latest Products
- Volkswagen Beetle£9.00
- Standard Beaverette Armoured Car Mk II£8.00
- Humber Armoured Car Mk IV£13.00
- AEC Armoured Car Mk I£15.00
- Guy Armoured Car Mk Ia£12.00
- Guy Armoured Car MkI£12.00
- Coventry Armoured Car (v2)£14.00
- Marmon Herrington Mk III£15.00
- Armoured Carrier Wheeled Indian Pattern MkII£13.00
- Staghound Armoured Car Howitzer£15.00
- Staghound Armoured Car AA (v2)£15.00
- Staghound Armoured Car MKIII (v2)£15.00
- Concrete Tank Traps (based)£4.00
- Concrete Tank Traps£4.00
- Type 24 Pillbox (Mowlem)£18.00
- Type 24 Pillbox (damaged)£18.00
- Type 23 Pillbox (damaged)£18.00
- Type 23 Pillbox£18.00
- Type 25 Pillbox (concrete base)£8.00
- Type 25 Pillbox (dug-in)£5.00
- Type 25 Pillbox (damaged)£8.00
- Type 25 Pillbox£8.00
- Type 26 Pillbox Prefab£10.00
- Type 26 Pillbox Prefab (damaged)£10.00
- Type 26 Pillbox (damaged)£10.00
- Type 26 Pillbox£10.00
- Type 22 Pillbox (damaged)£10.00
- Type 22 Pillbox£10.00
- M8 Ammunition Trailer£6.00
- Ben Hur G-527 Water Trailer£7.00
- Ben Hur G-518 Trailer (open)£6.00
- Ben Hur G-518 Trailer (covered)£18.00
Model comes as two parts; base and roof.
The Type 25 pill box was the only WWII circular pillbox. It had an entrance on one side and three embrasures (gun ports). It was officially known as the FW3/25.
The walls were 12 inches thick and the internal diameter was about six feet. This is the prefabricated version of the pillbox. It was made of prebuilt concrete slats and posts.
The model measures approximately 58mm by 58mm by 48mm tall.
This version depicts some damage showing general wear and tear.
Please note: Model comes as a resin print only
The Type 25 pill box was the only WWII circular pillbox. It had an entrance on one side and three embrasures (gun ports). It was officially known as the FW3/25.
The walls were 12 inches thick and the internal diameter was about six feet. This is the prefabricated version of the pillbox. It was made of prebuilt concrete slats and posts.
The model measures approximately 58mm by 58mm by 48mm tall.
This version depicts some damage showing general wear and tear.
Please note: Model comes as a resin print only
- Designer: Tabletop Printables