Medieval / Fantasy

Sort By:  
Drennheim and Ulvheim Towns
£66.00
Drennheim and Ulvheim Towns
£60.00
Drennheim and Ulvheim Towns
£6.00
Drennheim and Ulvheim Towns
£14.00
Drennheim and Ulvheim Towns
£10.00
Drennheim and Ulvheim Towns
£25.00
Drennheim and Ulvheim Towns
£85.00
Drennheim and Ulvheim Towns
£51.00
Drennheim and Ulvheim Towns
£28.00
Drennheim and Ulvheim Towns
£38.00
Drennheim and Ulvheim Towns
£6.00
Drennheim Miller House
Model comes as four parts, ground floor, first floor, second floor & roof.

This is the Miller House from the mythical town of Drennheim. 

The ground floor consists of a covered outside corridor with doorway leading to a single room with stairs in the corner. The first floor has two rooms the larger of which has a staircase. The smaller room as a sloped roof and chimney. The second floor is a single large room.

The roof is separate and models can be placed inside the ground, first and second floors.

The model measures approximately 160mm by 190mm and is 305mm high

Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£66.00
Drennheim Windmill
Model comes as ten parts, four floors & roof, .

This is the Windmill from the mythical town of Drennheim. 

The windmill is made up of 4 floors and a roof. The blades can turn and there are two gears and a shaft with actually turn to grind the wheat on the first floor.
A walkway is available which will connect the windmill to the Miller's house.

The model measures approximately 180mm by 180mm and is 430mm high

Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£60.00
Drinking Water Point
Model comes in one part.

This is a decorative section of wall which features 6 water fountains, 3 on each side and a decorative animal head at either end.


Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£6.00
Gallows (double)
Model comes in three parts; Gallows and trap doors.

This is a gallows set featuring a double gallows on a raised platform with steps either side leading up. There is a square hole for the poor victim to drop through. There are trapdoors which can be fitted open, closed or left off altogether.

The model covers an area of approximately 145mm by 111mm and is 120mm high.


Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£14.00
Gallows (single)
Model comes in two parts; Gallows and trap door.

This is a gallows set featuring the gallows on a raised platform with steps leading up. There is a square hole for the poor victim to drop through. There is a trapdoor which can be fitted open, closed or left off altogether.

The model covers an area of approximately 78mm by 120mm and is 118mm high.


Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£10.00
Ulvheim Cottage
Model comes as two parts, ground floor & roof.

This is a single storey cottage from the mythical town of Ulvheim. The main building features a single room with modelled stone walls and an ornate fireplace. The roof is separate and models can be placed inside.


Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£25.00
Ulvheim Inn
Model comes as four parts, ground floor, first floor, second floor & roof.

This is the Inn from the mythical town of Ulvheim. 

The ground floor consists of a covered entrance to the inn,  this leads into a large room with a staircase and a smaller room. The first floor is made up of two rooms, both larger than the ground floor. The larger of the two rooms has a staircase up to the second floor. The second floor is made of 3 rectangular rooms on of which has a bay window. The roo has  3 bay windows on each side, these are solid.

The roof is separate and models can be placed inside the ground, first and second floors.

The model measures approximately 185mm by 140mm and is 315mm high

Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£85.00
Ulvheim Noble House
Model comes as five parts, ground floor, first floor & roof.

This is the Noble House from the mythical town of Ulvheim. 

The ground floor is made of a large single room with an L-shaped staircase in one corner. In another corner is an archway to a small tower.
The first floor is a smaller single room with a doorway leading to a balcony and steps to the top of the tower platform

The roof is separate and models can be placed inside.

The model measures approximately 245mm by 170mm and is 210mm high

Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£51.00
Ulvheim Small Stable
Model comes as two parts, ground floor & roof.

This is a single storey stable from the mythical town of Ulvheim. The main building features a stable block split into 2 rooms, the larger of which has two stalls for animals. The roof is separate and models can be placed inside.

The model measures approximately 194mm by 138mm and is 138mm high

Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£28.00
Ulvheim Tower House
Model comes as five parts, ground floor, roof & tower.

This is a Tower House from the mythical town of Ulvheim. The main building features an L-shaped room and a smaller room on the ground floor. A tower goes through the roof and is topped with a spire. The roof is separate and models can be placed inside.

The model measures approximately 138mm by 124mm and is 314mm high

Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£38.00
Water Fountain
Model comes in one part.

This is a decorative water fountain featuring a central four-sided plinth with an animal head water fountain on each side.

It would make a nice central feature in any town square.

The model covers an area of approximately 76mm square by 61mm high


Paint and Glue Miniatures is a licensed printer for Wonder Worlds.
Drennheim and Ulvheim Towns
£6.00
Per Page      1 - 11 of 11
  • 1