USA

Sort By:  
Airborne Jeep
£6.00
Soviet Assault Gun
£7.50
American Vehicle Trailer
£18.00
American Vehicle Trailer
£6.00
American Vehicle Trailer
£7.00
American Staff Car
£9.00
American Tractor
£8.00
American Truck
£15.50
American Truck
£15.50
4 x.505 cal Browning MGs
£12.00
American Truck
£11.00
American Truck
£10.00
American Truck
£11.00
American Light Tank
£11.00
Jeep 15
Model comes in several parts, body, wheels, axles & weapons.

Another version of an airborne jeep.
Airborne Jeep
£6.00
1930 Cadillac Fleetwood
Model comes in 10 parts (body is split in two) (resin is one part)

The Cadillac Fleetwood was a 5.7 litre V8 limousine. The Fleetwood name was used in a number of versions from 1934 to 1986.

The version here is one of the early models built around 1938


Please note: Photo is of a resin print.
Mid-war Car
£9.00
ASU-57
Model comes in 5 parts (plastic,  resin is 1 part)

The ASU-57 was a small Soviet assault gun designed for use by Soviet airborne divisions. It was in service between 1951 and the late 60s.

It was armed with a 57mm gun and a 7.62mm anti-aircraft machine gun.

The ASU-57 was designed to be dropped by parachute from an An-12 aircraft.

Please Note: Model photo is of a resin print






Soviet Assault Gun
£7.50
Ben Hur G-518 Trailer (covered)
Model comes as one part (resin)

The Ben Hur was a nickname for the American 1 ton 2 wheel cargo trailer. It was designated as the G-518 Trailer of which over 259,000 were made.

It was designed for towing by vehicles of 3/4 ton or heavier.

It came in several variants including water trailers (G527 Trailer). It was produced between 1941 and 1945. Other versions included generator trailers, radar, spares and ammo.

Note: Trailer comes with the front hitch wheel either up for towing or down for parking.
American Vehicle Trailer
£18.00
Ben Hur G-518 Trailer (open)
Model comes as one part (resin)

The Ben Hur was a nickname for the American 1 ton 2 wheel cargo trailer. It was designated as the G-518 Trailer of which over 259,000 were made.

It was designed for towing by vehicles of 3/4 ton or heavier.

It came in several variants including water trailers (G-527 Trailer). It was produced between 1941 and 1945. Other versions included generator trailers, radar, spares and ammo.

Note: Trailer comes with the front hitch wheel either up for towing or down for parking.
American Vehicle Trailer
£6.00
Ben Hur G-527 Water Trailer
Model comes as one part (resin)

The Ben Hur was a nickname for the American 1 ton 2 wheel cargo trailer. It was designated as the G-518 Trailer of which over 259,000 were made.

It was designed for towing by vehicles of 3/4 ton or heavier.

It came in several variants including water trailers (G-527 Trailer). It was produced between 1941 and 1945. Other versions included generator trailers, radar, spares and ammo.

Note: Trailer comes with the front hitch wheel either up for towing or down for parking.
American Vehicle Trailer
£7.00
Cadillac 75
Model comes in 8 parts.

The Cadillac 75 was a V8 engined car which was used in military service in WWII. It was designed in 1938 and famously used by General Patton.

Please note the photos provided are of the resin print. The plastic version is split into two so may need some filling to hide the join
American Staff Car
£9.00
Caterpillar D7 (Bulldozer)
Model comes in 10parts.

The D7 was an American tractor which saw service in WWII but has been manufactured ever since. It was designed in 1938 and entered military service in 1940.

This version is has the bucket fitted.
American Tractor
£8.00
CCKW 353 Flatbed Truck (v.1)
Model comes in one part (resin).

The GMC CCKW was a 2.5 ton truck, nicknamed the 'Deuce & a Half'. It came in two models, the 352 was a short wheel base and the 353 was long wheel base.

It was produced from 1941 to 1945 and over 572,000 of all varieties were built. Around 54,000 353s were built, a quarter of which were fitted with a machine gun mounting ring.

The CCKW truck was built by the General Motorworks Company. GMC used the initials to signify:
"C" - designed in 1941
"C" - conventional cab
"K" - all-wheel drive
"W"- dual rear axles

The truck saw service through WWII & Korea and into the 1960s.

There were many variants of the truck and the one modelled here is an alternative to our other similar model with extended sides on the bed.


Note: (Model is only available as a resin print)
American Truck
£15.00
CCKW 353 Flatbed Truck (v.2)
Model comes in one part (resin).

The GMC CCKW was a 2.5 ton truck, nicknamed the 'Deuce & a Half'. It came in two models, the 352 was a short wheel base and the 353 was long wheel base.

It was produced from 1941 to 1945 and over 572,000 of all varieties were built. Around 54,000 353s were built, a quarter of which were fitted with a machine gun mounting ring.

The CCKW truck was built by the General Motorworks Company. GMC used the initials to signify:
"C" - designed in 1941
"C" - conventional cab
"K" - all-wheel drive
"W"- dual rear axles

The truck saw service through WWII & Korea and into the 1960s.

There were many variants of the truck and the one modelled here is an alternative to our other similar model with extended sides on the bed and comes with canvas cover support hoops.


Note: (Model is only available as a resin print)
American Truck
£15.00
CCKW 353 Fuel Tanker (v.2)
Model comes in one part (resin).

The GMC CCKW was a 2.5 ton truck, nicknamed the 'Deuce & a Half'. It came in two models, the 352 was a short wheel base and the 353 was long wheel base.

It was produced from 1941 to 1945 and over 572,000 of all varieties were built. Around 54,000 353s were built, a quarter of which were fitted with a machine gun mounting ring.

The CCKW truck was built by the General Motorworks Company. GMC used the initials to signify:
"C" - designed in 1941
"C" - conventional cab
"K" - all-wheel drive
"W"- dual rear axles

The truck saw service through WWII & Korea and into the 1960s.

There were many variants of the truck and the one modelled here is for a fuel tanker which comes with two fuel bowsers without rows of fuel cans down the side.


Note: (Model is only available as a resin print)
American Truck
£15.50
CCKW 353 Fuel Tanker (v.3)
Model comes in one part (resin).

The GMC CCKW was a 2.5 ton truck, nicknamed the 'Deuce & a Half'. It came in two models, the 352 was a short wheel base and the 353 was long wheel base.

It was produced from 1941 to 1945 and over 572,000 of all varieties were built. Around 54,000 353s were built, a quarter of which were fitted with a machine gun mounting ring.

The CCKW truck was built by the General Motorworks Company. GMC used the initials to signify:
"C" - designed in 1941
"C" - conventional cab
"K" - all-wheel drive
"W"- dual rear axles

The truck saw service through WWII & Korea and into the 1960s.

There were many variants of the truck and the one modelled here is for a fuel tanker which comes with two fuel bowsers with rows of fuel cans down the side.


Note: (Model is only available as a resin print)
American Truck
£15.50
CCKW 353 K53 Radio Shelter Truck
Model comes in one part (resin).

The GMC CCKW was a 2.5 ton truck, nicknamed the 'Deuce & a Half'. It came in two models, the 352 was a short wheel base and the 353 was long wheel base.

It was produced from 1941 to 1945 and over 572,000 of all varieties were built. Around 54,000 353s were built, a quarter of which were fitted with a machine gun mounting ring.

This version is a radio truck version.

Note: (Model is only available as a resin print)
American Truck
£16.50
CCKW 353 M45 Quadmount
This model comes in 9 parts; Body, Bed, Quadmount MG & 6 Wheels.

The M45 Quadmount was developed by the W. L. Maxon Company in America for the American Army. It consisted of 4 .505 calibre Browning machine guns mounted on a trailer.

In this configuration the whole trailer was lifted onto a truck and secured to the bed.

Quadmounts were used in the Euopean and Pacific theatres. As the amount of enemy aircraft diminished towards the end of the war, they were often use din anti-personnel roles. It was operated by a crew of three; a gunner and two loaders.
4 x.505 cal Browning MGs
£12.00
CCKW Truck (covered)
Model comes in 7 parts (plastic. Resin in 2)

The GMC CCKW was a 2.5 ton truck, nicknamed the 'Deuce & a Half'. It came in two models, the 352 was a short wheel base and the 353 was long wheel base.

It was produced from 1941 to 1945 and over 572,000 of all varieties were built. Around 54,000 353s were built, a quarter of which were fitted with a machine gun mounting ring.




American Truck
£11.00
CCKW Truck (open MG)
Model comes in 11 parts (plastic. Resin in 2)

The GMC CCKW was a 2.5 ton truck, nicknamed the 'Deuce & a Half'. It came in two models, the 352 was a short wheel base and the 353 was long wheel base.

It was produced from 1941 to 1945 and over 572,000 of all varieties were built. Around 54,000 353s were built, a quarter of which were fitted with a machine gun mounting ring.




American Truck
£10.00
CCKW Truck MG (covered)
Model comes in 7 parts (plastic. Resin in 2)

The GMC CCKW was a 2.5 ton truck, nicknamed the 'Deuce & a Half'. It came in two models, the 352 was a short wheel base and the 353 was long wheel base.

It was produced from 1941 to 1945 and over 572,000 of all varieties were built. Around 54,000 353s were built, a quarter of which were fitted with a machine gun mounting ring.



American Truck
£11.00
Chaffee (v3)
The Chaffee saw service in the American Army between 1944 and 1953, though it was still in action as late as the 1970s in some armies. It was intended to replace the Stuart and the first models entered Europe in November 1944. It weighed 20 tonnes and was armed with a 75mm M6 gun and two Browning machine guns. It was crewed by five; commander, gunner, loader, driver and assistant driver/radio operator
American Light Tank
£11.00
Chevrolet 3t GS Covered Truck
Model comes as one part.
£11.00
Chevrolet 3t GS Truck
Model comes as one part.
£10.50
Per Page      1 - 20 of 121