Latest Products
Volkswagen Beetle£9.00
Standard Beaverette Armoured Car Mk II£8.00
Humber Armoured Car Mk IV£13.00
AEC Armoured Car Mk I£15.00- Guy Armoured Car Mk Ia£12.00
Guy Armoured Car MkI£12.00
Coventry Armoured Car (v2)£14.00
Marmon Herrington Mk III£15.00
Armoured Carrier Wheeled Indian Pattern MkII£13.00
Staghound Armoured Car Howitzer£15.00
Staghound Armoured Car AA (v2)£15.00
Staghound Armoured Car MKIII (v2)£15.00
Concrete Tank Traps (based)£4.00
Concrete Tank Traps£4.00
Type 24 Pillbox (Mowlem)£18.00
Type 24 Pillbox (damaged)£18.00
Type 23 Pillbox (damaged)£18.00
Type 23 Pillbox£18.00
Type 25 Pillbox (concrete base)£8.00
Type 25 Pillbox (dug-in)£5.00
Type 25 Pillbox (damaged)£8.00
Type 25 Pillbox£8.00
Type 26 Pillbox Prefab£10.00
Type 26 Pillbox Prefab (damaged)£10.00
Type 26 Pillbox (damaged)£10.00
Type 26 Pillbox£10.00
Type 22 Pillbox (damaged)£10.00
Type 22 Pillbox£10.00
M8 Ammunition Trailer£6.00
Ben Hur G-527 Water Trailer£7.00
Ben Hur G-518 Trailer (open)£6.00
Ben Hur G-518 Trailer (covered)£18.00
Type 23 Pillbox (damaged)
British Defence System
£18.00
Model comes as two parts; base and roof.
The Type 23 pill box was rectangular pillbox. It was made of an open square and a closed square with a roof. The closed section has three embrasures (gun ports). The open side has a mount for a Bren or Lewis gun. It was officially known as the FW3/23.
The walls were 12 inches thick and it measured about eight by sixteen feet.
The model measures approximately 124mm by 70mm by 64mm tall.
This version depicts some damage showing wear and tear.
Please note: Model comes as a resin print only
The Type 23 pill box was rectangular pillbox. It was made of an open square and a closed square with a roof. The closed section has three embrasures (gun ports). The open side has a mount for a Bren or Lewis gun. It was officially known as the FW3/23.
The walls were 12 inches thick and it measured about eight by sixteen feet.
The model measures approximately 124mm by 70mm by 64mm tall.
This version depicts some damage showing wear and tear.
Please note: Model comes as a resin print only
- Designer: Tabletop Printables