Latest Products
- 40mm Round Urban Bases£5.00
- 25mm Round Urban Bases£3.00
- Volkswagen Type 166 Schwimmwagen (with crew)£7.00
- Volkswagen Type 166 Schwimmwagen£7.00
- Sd Kfz 2 Kettenkrad (with crew)£7.00
- Sd Kfz 2 Kettenkrad£7.00
- Flak 30 Autocannon£7.00
- Pak 40 Anti Tank Gun (limbered)£9.00
- Pak 40 Anti Tank Gun£9.00
- Fallschirmjager Pak 40 Team£12.00
- Fallschirmjager LG40 Team£2.60
- Fallschirmjager Panzerschrek Team£1.40
- Fallschirmjager 81mm Mortar Team£3.20
- Fallschirmjager MG34 Team£2.60
- Fallschirmjager Medic Team£2.20
- Fallschirmjager Tank Riders£4.60
- Fallschirmjager Marching Unit£6.50
- Fallschirmjager Weapons Squad£7.30
- Fallschirmjager Rifle Squad£8.00
- Caterpillar D7£8.00
- Sd Kfz 251 Ausf D/1 Falke (v1)£11.50
- Polski Fiat 508 IIIw Lazik (hood, no spare wheel)£5.00
- Polski Fiat 508 IIIw Lazik (hood down, BAR)£5.00
- Polski Fiat 508 IIIw Lazik (hood down, screen down)£5.00
- Polski Fiat 508 IIIw Lazik (hood down, screen down, spare wheel)£5.00
- Polski Fiat 508 III (2 door, spare)£5.00
- Polski Fiat 508 III Pickup (covered)£5.00
- Polski Fiat 508 III Ambulance£5.00
- Polski Fiat 508 III Pickup£5.00
- Polski Fiat 508 IIIw Lazik (hood down, screen up)£5.00
- Polski Fiat 508 III Panel Van£5.00
- Polski Fiat 508 III Delivery Van£5.00
Model comes as two parts; base and roof.
The Type 26 pill box was a simple square shape. It had an entrance on one side and embrasures (gun ports) on the other three. It was officially known as the FW3/26.
The walls were 18 inches thick and the external wall size was around 10 feet. This is the prefabricated version of the pillbox. It was made of prebuilt concrete slats and posts.
The model measures approximately 64mm by 64mm by 50mm tall.
Please note: Model comes as a resin print only
The Type 26 pill box was a simple square shape. It had an entrance on one side and embrasures (gun ports) on the other three. It was officially known as the FW3/26.
The walls were 18 inches thick and the external wall size was around 10 feet. This is the prefabricated version of the pillbox. It was made of prebuilt concrete slats and posts.
The model measures approximately 64mm by 64mm by 50mm tall.
Please note: Model comes as a resin print only
- Designer: Tabletop Printables