Latest Products
- M8 Ammunition Trailer£6.00
- Ben Hur G-527 Water Trailer£7.00
- Ben Hur G-518 Trailer (open)£6.00
- Ben Hur G-518 Trailer (covered)£18.00
- T30 Howitzer Motor Carriage£18.00
- M3 Gun Motor Carriage v2 ( Copy )£18.00
- M3 Gun Motor Carriage v2£18.00
- M3 Half-track (command)£16.00
- M3 Half-track (covered) v2£16.00
- M3 Half-track (open) v2£16.00
- M16 Multiple Gun Motor Carriage£17.00
- M13 Multiple Gun Motor Carriage£17.00
- M14 Multiple Gun Motor Carriage£17.00
- M21 Mortar Motor Carriage (stowage)£16.00
- M21 Mortar Motor Carriage£16.00
- M2A1 Half-track (covered with gun)£16.00
- M2A1 Half-track (covered)£16.00
- M2A1 Half-track (half-cover)£16.00
- M2A1 Half-track (open)£16.00
- M2 Half-track (open)£16.00
- M2 Half-track (covered)£16.00
- M5A1 Half-track (covered with gun) v2£16.00
- M5A1 Half-track (covered) v2£16.00
- M5A1 Half-track (open) v2£16.00
- M5 Half-track (open) v2£16.00
- M5 Half-track (covered) v2£16.00
- M3A1 Scout Car (half cover) v2£16.00
- M3A1 Scout Car (open) v2£16.00
- M3A1 Scout Car (covered) v2£165.00
- Bedford MWD Truck (late covered)£12.00
- Bedford MWD Truck (late open)£12.00
- Bedford MWD Truck (late van)£12.00
Model comes as seven parts.
This is a nicely detailed large church which has fallen into ruin either through time or bombing, you decide.
The church is made up of several sections including a two-piece tower and the 3D modelling looks great. It measures approximately 640mm long by 230mm wide 300mm tall.
It may be expensive but it is a quality model which takes around 95 hours to print.
The tower is hollow so if you want your minis to stand on top of the tower you will need to fit a floor of card or balsa wood, though this can be done quite easily.
The model can be glued together or left in parts as they all but up against each other nicely, or you might want to magnetise it for easy transportation and rebuilding.
This is a nicely detailed large church which has fallen into ruin either through time or bombing, you decide.
The church is made up of several sections including a two-piece tower and the 3D modelling looks great. It measures approximately 640mm long by 230mm wide 300mm tall.
It may be expensive but it is a quality model which takes around 95 hours to print.
The tower is hollow so if you want your minis to stand on top of the tower you will need to fit a floor of card or balsa wood, though this can be done quite easily.
The model can be glued together or left in parts as they all but up against each other nicely, or you might want to magnetise it for easy transportation and rebuilding.
- Availability: In Stock