Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
British Flamethrower Tank
£21.00
covers many historical periods
£89.00
covers many historical periods
£95.00
European Church
£16.00
European Church
£18.00
Churchill Crocodile
Model comes as 5 parts; hull, tracks, turret & trailer.

The Crocodile was a variant of the Tank, Infantry, Mk VI (A22) Churchill Mark VII, and was adapted as a flamethrower vehicle.

It was in service in 1944 and 1945 and also saw action in the Korean War.

It had a crew of six; commander, gunner, driver, radio operator/loader, flamethrower gunner, co-driver/hull gunner. It had a 6.5 ton armoured trailer which carried 400 gallons of fuel as well as  gas propellant. There was enough fuel for 80 one-second bursts of flame.

The turret contained the main gun as well as the flamethrower so it could be operated as a normal tank with its QF 75mm gun.

Some 800 coversion kits were made and some were fitted to the Mk VIII Churchill also.
British Flamethrower Tank
£21.00
Large European Church
Model comes in 11 parts.

This is a magnificent model which would make a fantastic centre piece in any European battle from medieval through to post modern.

The church is made up of several sections including a two-piece tower and the 3D modelling looks great. It measures approximately 400mm long by 250mm wide 270mm tall.

It may be expensive but it is a quality model which takes around 90 hours to print, the central nave alone takes 24 hours.

The tower is hollow so if you want your minis to stand on top of the tower you will need to fit a floor of card or balsa wood, though this can be done quite easily. 

The model can be glued together or left in parts as they all butt up against each other nicely, or you might want to magnetise it for easy transportation and rebuilding.
covers many historical periods
£89.00
Large Ruined Church
Model comes as seven parts.

This is a nicely detailed large church which has fallen into ruin either through time or bombing, you decide.

The church is made up of several sections including a two-piece tower and the 3D modelling looks great. It measures approximately 640mm long by 230mm wide 300mm tall.

It may be expensive but it is a quality model which takes around 95 hours to print.

The tower is hollow so if you want your minis to stand on top of the tower you will need to fit a floor of card or balsa wood, though this can be done quite easily. 
The model can be glued together or left in parts as they all but up against each other nicely, or you might want to magnetise it for easy transportation and rebuilding.
covers many historical periods
£95.00
Small Mediterranean Church
Model comes in three parts; main building, roof, steeple roof

This is a small stone church of Mediterranean style. It could be used anywhere in the Mediterranean and Italy

The roof of the church is removable allowing the use of the inside for troops. The roof of the steeple is also removable, a handy lace for a spotter or sniper! (though note the steeple roof is not shown on the photos)

The  1/56 scale model measures approximately 143mm long, 120mm wide and 210mm tall.
European Church
£16.00
Small Stone Church
Model comes in seven parts; main building, roof, roof supports x2, steeple, steeple roof, cross

This is a small stone church of European style. The roof of the church is removable allowing the use of the inside for troops. The roof off the steeple is also removable, a handy lace for a spotter or sniper!

The  1/56 scale model measures approximately 143mm long, 120mm wide and 210mm tall.
European Church
£18.00
Per Page      1 - 5 of 5
  • 1